Skip to main content

How to Improve Circulation for Overheating Command Centers

Summary: Good circulation is a necessity in every command center.

Command centers require an immense amount of power. With a variety of high-tech equipment like your network operations center video wall stored within each center, there needs to be a significant amount of cooling to create a comfortable balance. This guide will walk you through some ways that you can improve the overall circulation in your command center.

Be Careful Using Standard A/C Units

As you already know, command centers must be performing at peak efficiency 24/7. If an emergency were to occur and a computer was malfunctioning because of excessive dust, severe issues could arise. Your standard A/C units may supply significant cooling to a spot, but it can also spew out clouds of dust if not cleaned properly. An alternative would be to purchase an HVAC unit that comes with disposable filters. You’ll want to clean these on a monthly basis.

Install Water Cooling

Computers tend to run hot when they start overclocking and working themselves beyond their capacity. If your command center utilizes software and programs that are demanding, you might want to integrate water cooling within each computer instead of your standard fan. The latter tends to blow out dust and can create an environment that’s filled with dust particles. Water cooling on the other hand provides less dust output and keeps the entire computer cool and at safe temperatures.

Relocate Equipment

Another option you can take advantage of is relocating certain equipment to a sealed off area. Not only will this provide more room for your operators, but it can also reduce the amount of heat and dust coming out from each computer. Be sure to consult with a professional A/V integrator beforehand to ensure everything can be moved safely without causing any interruptions.